WELD SHOP AVAILABILITY DATES 

(FOR D1.1 AND D1.5 WELDING CERTIFICATION)

ENTIRE MONTHS OF MARCH, APRIL AND MAY (MONDAY THRU THURSDAY)

CALL TRAINING CENTER TO RESERVE YOUR DATES

"NEW CLASS TO BE OFFERED"

BEST PRACTICES IN HEALTH-CARE CONSTRUCTION IN OCCUPIED FACILITIES

   Workshop Introduction - This workshop promotes awareness of infection control in health-care facilities and outlines protection methods and safe work practices for UBC members who are working in these types of facilities. The entire workshop focuses on renovations and additions to existing, occupied buildings. It does not discuss new construction.   CALL TO REGISTER.

Class Dates will be scheduled when minimum registration number has been reached. 

DDDDDDDD

Lebanon Training Center Current Events

ATTENTION!! ATTENTION!! ATTENTION!! For those persons needing a Rigging or Scaffold Refresher                                     

Rigging Refresher - February 11, 2012 - 7 AM to Completion

Scaffold Refresher - February 18, 2012 - 7 AM to Completion

"ADVANCE YOUR HEAVY-HIGHWAY SKILLS" Register Today for a one day seminar on the Bidwell machine set-up and use

Dates:  February 6, 2012 or February 7, 2012 - 7A.M.  PLEASE NOTE: CLASS SIZE IS LIMITED

"Changing Requirements that will be needed to work on Heavy Highway Projects:

*OSHA 10

Scaffold Qualification

Rigging Qualification

First Aid/CPR/AED

***If you have your welding certification D1.5 this could also lead to more work***

PLEASE NOTE: COURSES AVAILABLE AT THE LEBANON TRAINING CENTER  

WEEKEND CLASSES

32 Hr. Scaffold Qualification Saturdays  1/21/12, 1/28/12 & 2/4/12 --- 1/21, 28 - 7 am to 6:30 pm and 2/4 - 7 am to 5:30 pm
32 Hr. Rigging Qualification Saturdays  2/11/12, 2/18/12 & 2/25/12 --- 2/11, 18 - 7 am to 6:30 pm and 2/25/11 - 7 am to 5:30 pm --THIS CLASS HAS BEEN CANCELLED DUE TO NOT MEETING MINIMUM NUMBER REQUIREMENTS.
First Aid/CPR/AED Saturday  3/10/12 -  8 am to completion

WEEKDAY CLASSES

Powered Industrial Truck Operator Tues. & Wed.  4/3/12 & 4/4/12 --- 7 am to 5:30 pm each day
Welding Basics & Welding Advanced (leading to welding certification) Monday thru Thursday entire month of March ---
7 am to 5:30 pm (Call Lebanon Training Center to check on availability)

****Must have union dues paid thru current month to participate in classes****

PLEASE NOTE: THIS IS A WORK ENVIRONMENT ---- WORK CLOTHES, WORK SHOES AND PROPER PPE.                               NO EXCEPTIONS

ALL START TIMES ARE 7 A.M. UNLESS OTHERWISE NOTED

CALL TO REGISTER

717-273-5277 or toll free 1-888-346-8880

--------OSHA 10/30 REPLACEMENT CARDS REVISION--------

For members needing an OSHA 10/30 replacement card the National Resource Center/CPWR is requiring a form be filled out and a check in the amount of $15.00 made payable to: National Resource Center.  Check should be mailed to the Training Center and we will complete the form and forward along with your check to the Resource Center. 

PLEASE NOTE!!!

JOURNEYMAN

YOU HAVE THE OPPORTUNITY TO TAKE QUALIFICATION AND CERTIFICATION CLASSES THROUGHOUT THE YEAR WHEN OFFERED TO OUR APPRENTICES. PLEASE CALL THE TRAINING CENTER FOR AVAILABLE DATES AND WHAT WILL WORK FOR YOUR SCHEDULE.

Call the Lebanon Training Center to register

717-273-5277 or toll free 1-888-346-8880

CALL EARLY TO REGISTER

(Class size is limited)

SCRANTON SKILL ADVANCEMENT LOCAL UNION #645

               LAS VEGAS MILLWRIGHT TRAINING

GE Gas Turbine Qualification Program for Members

 The Carpenters International Training Center has the following openings in the Millwright GE Gas Turbine Member Training Class:

 February 9 to 12, 2012 (4 days) Thurs. to Sun.

February 13 to 16, 2012 (4 days) Mon. to Thurs.

March 5 to 9, 2012 (5 days) Mon. to Fri.

Please Note: Class size is limited; call the Lebanon Center as soon as       possible to reserve a place in this important millwright training.  Participation will be on a first come basis.

Members attending this workshop in Las Vegas must complete the following prerequisite courses:

G.E. Gas Turbine Familiarization (including Hytorc)

U.B.C. Rigging Qualification

Millwright 16-hour Safety Course (Previously called the Westinghouse 16 hour safety course)

Members will have to bring work clothes, gloves and leather boots to the workshop.  Hardhats, safety glasses, hearing protection and tools will be provided.

ALL MEMBERS MUST BE IN GOOD STANDING TO PARTICIPATE IN THIS TRAINING

The Carpenters International Training Center has availability in the following Steam Turbine classes: